Canyon 2WD L5-3.5L VIN 6 (2004)
1. Collapse the balance shaft chain tensioner using the following procedure:
1.1.
Rotate the ratchet release lever (2) clockwise and hold.
1.2.
Collapse the tensioner shoe (1) and hold.
1.3.
Release the ratchet lever.
2. Slowly release the pressure on the shoe, until the ratchet lever moves to the first detent and a "click" is heard and felt.
3. Insert a pin through the hole in the release lever in order to lock the tensioner shoe in the collapsed position.
Notice: Refer to Fastener Notice in Service Precautions.
Important: Ensure the tensioner release lever is facing outward.
4. Install the balance shaft chain tensioner and bolts.
^
Tighten the balance shaft chain tensioner bolts to 10 Nm (89 inch lbs.).
5. Remove the pin holding the tensioner to tighten any slack in the balance shaft drive chain.
