Canyon 2WD L5-3.5L VIN 6 (2004)
Engine Block Heater: Service and Repair
Coolant Heater Cord Replacement
Coolant Heater Cord Replacement
Removal Procedure
1. Remove the battery box.
2. Disconnect the coolant heater cord (4) from the coolant heater (6).
3. Cut the coolant heater cord ties (2, 5) from the following:
^
The battery cables conduit (3)
^
The engine wiring harness conduit (1)
4. Remove the coolant heater cord (4) from the vehicle.
Installation Procedure
1. Position the coolant heater cord (4) to the engine.
2. Route the coolant heater cord (4) along the engine wiring harness conduit (1) and battery cables conduit (3).
3. Connect the coolant heater cord (4) to the coolant heater (6).
4. Secure the coolant heater cord ties (2, 5) to the following:
^
The battery cables conduit (3)
^
The engine wiring harness conduit (1)
5. Install the battery box.
6. Place the remaining coolant heater cord (4) between the following:
^
The battery box
^
The underhood fuse block
