Canyon 2WD L5-3.5L VIN 6 (2004)
6. Position the engine wiring harness bracket to the engine and harnesses.
7. Install the engine wiring harness bracket bolts.
^
Tighten the engine wiring harness bracket bolts to 10 Nm (89 inch lbs.).
8. Secure the following wiring harness retainers to the engine wiring harness bracket:
^
The battery cable
^
The engine (4, 6)
^
The MAP sensor (5)
9. Install the left front wheelhouse liner.
10. Install the left front wheel.
11. Lower the vehicle.
12. Connect the engine wiring harness retainer (1) to the intake manifold (2).
13. Install the generator.