GMC Workshop Service and Repair Manuals > Canyon 2WD L5-3.5L VIN 6 (2004) > Engine, Cooling and Exhaust | Engine | Timing Components | Variable Valve Timing | Variable Valve Timing Solenoid | Component Information | Diagrams

Tune-up and Engine Performance Checks > < Variable Valve Timing Solenoid|Diagrams|Page 2548

Page 2

1. Install a new O-ring seal to the actuator solenoid valve (2).
2. Lightly lubricate the O-ring seal with clean engine oil.
3. Install the CMP actuator solenoid valve (2) into the cylinder head.

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the camshaft position actuator solenoid valve bolt (3).

Tighten
Tighten the CMP actuator solenoid valve bolt to 10 N.m (89 lb in).

5. Connect the engine wiring harness electrical connector (1) to the CMP actuator solenoid valve (6).

Engine, Cooling and Exhaust
Engine
Timing Components
Variable Valve Timing
Variable Valve Timing Solenoid / Diagrams
Page 2549

Tune-up and Engine Performance Checks > < Variable Valve Timing Solenoid|Diagrams|Page 2548

GMC Workshop Service and Repair Manuals

Canyon 2WD L5-3.5L VIN 6 (2004)

Engine, Cooling and Exhaust Engine Timing Components Variable Valve Timing Variable Valve Timing Solenoid / Diagrams Page 2549

Engine, Cooling and Exhaust Engine Timing Components Variable Valve Timing Variable Valve Timing Solenoid / Diagrams Page 2549

Engine, Cooling and Exhaust
Engine
Timing Components
Variable Valve Timing
Variable Valve Timing Solenoid / Diagrams
Page 2549

Engine, Cooling and Exhaust
Engine
Timing Components
Variable Valve Timing
Variable Valve Timing Solenoid / Diagrams
Page 2549