Canyon 2WD L5-3.5L VIN 6 (2004)
Marker Lamp Bulb: Service and Repair
Tail and /or Backup, Sidemarker, Stop, Turn Signal
TAIL LAMP ASSEMBLY AND /OR BACKUP, SIDEMARKER, STOP, TURN SIGNAL BULB REPLACEMENT
REMOVAL PROCEDURE
1. Open the tailgate.
2. Remove the screws from the tail lamp assembly.
3. Remove the lamp assembly.
4. Remove the tail lamp and backup lamp sockets, depressing the locking tab and rotating counterclockwise.
5. Remove the bulbs from the tail lamp, backup lamp and/or side marker lamp sockets.
INSTALLATION PROCEDURE
