Canyon 2WD L5-3.5L VIN 6 (2004)
5. Remove the bolt securing EVAP canister purge solenoid valve to the engine.
6. Remove the EVAP canister purge solenoid valve from the engine.
INSTALLATION PROCEDURE
1. Position the EVAP canister purge solenoid valve to the engine.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolt securing EVAP canister purge solenoid valve to the engine.
Tighten
Tighten the EVAP canister purge solenoid valve bolt to 10 N.m (89 lb in).
3. Connect the electrical connector to the EVAP canister purge solenoid valve.
