Canyon 2WD L5-3.5L VIN 6 (2004)
9. Remove the ignition coil bolts.
10. Remove the ignition coils from the camshaft cover.
INSTALLATION PROCEDURE
IMPORTANT: Ensure the ignition coil seals are properly seated to the camshaft cover.
1. Install the ignition coils into the camshaft cover.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the ignition coil bolts.
Tighten
Tighten the ignition coil bolts to 10 N.m (89 lb in).
