Canyon 2WD L5-3.5L VIN 6 (2004)
Instrument Panel Control Module: Customer Interest
Instruments - Battery Message in Information Display
Bulletin No.: 04-08-49-013
Date: April 22, 2004
TECHNICAL
Subject:
Battery Message Displayed in Drivers Information Center (Recalibrate Instrument Panel Cluster)
Models:
2004 Chevrolet Colorado
2004 GMC Canyon
Condition
Some customers may comment on a chime sounding and a battery message displayed in the Driver Information Center (DIC).
Correction
Important:
The Instrument Panel Cluster will not be recalibrated using the Service Programming System. The recalibration is performed using a special
function of the TECH 2(R).
Technicians are to recalibrate the Instrument Panel Cluster (IPC) using the TECH 2(R). The calibration program will be released beginning with TIS
satellite data update version 3.0, which includes TECH 2(R) update version 24.001, to be available on March 8, 2004. As always make sure your
TECH2(R) is updated with the latest software version. The IPC Recalibration procedure is accessed on the TECH 2(R) using the following steps:
1.
Connect the TECH 2(R) to the vehicle.
2.
Build the vehicle and select Body.
3.
Select Instrument Panel Cluster.
4.
Select Special Functions.
5.
Select IPC Recalibration.
Warranty Information
For vehicles repaired under warranty, use the table shown.
Disclaimer
