Canyon 2WD L5-3.5L VIN 6 (2004)
10. Remove the connector position assurance (CPA) (3) from the side impact sensor yellow 2-way connector (5) located near the middle of the door.
11. Disconnect the side impact sensor yellow 2-way connector (5) located near the middle of the door.
12. Remove the trim panel.
13. Remove the connector positive assurance (CPA) from the seat belt pretensioner-left connector.
14. Disconnect the seat belt pretensioner-left connector from the vehicle harness connector.
15. Remove the garnish molding.
16. Disconnect the roof rail module connector (1) from the vehicle harness.
