Canyon 2WD L5-3.5L VIN 6 (2004)
1. Position the rear center seat belt assembly on the floor panel.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolt which retains the rear center seat belt assembly to the floor.
Tighten
Tighten the rear center seat belt bolt to 52.5 N.m (39 lb ft).
3. Route the rear center seat belt webbing up through the guide loop. Ensure that the seat belt webbing is not twisted.
4. Install the body rear trim panel.
5. Install the rear seat shoulder belt guide cover.
