Canyon 2WD L5-3.5L VIN 6 (2004)
Seat Belt Guide Track: Service and Repair
Shoulder Belt Guide Adjuster Replacement - Front (Regular Cab)
SHOULDER BELT GUIDE ADJUSTER REPLACEMENT - FRONT (REGULAR CAB)
REMOVAL PROCEDURE
1. Open the front seat belt upper guide shoulder bolt trim cover.
2. Remove the front seat belt upper guide shoulder bolt.
3. Remove the knob (2) from the front seat belt shoulder adjuster (1).
4. Remove the body rear corner upper trim panel (3).
5. Remove the 2 bolts securing the adjuster to the vehicle.
6. Remove the front seat belt shoulder adjuster from the vehicle.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the 2 bolts securing the front seat belt shoulder adjuster (1) to the vehicle.
Tighten
Tighten the front seat belt shoulder adjuster bolts to 52.5 N.m (39 lb ft).
2. Install the body rear corner upper trim panel (3).
3. Install the knob (2) on the front seat belt shoulder adjuster (1).
4. Install the front seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten
