Canyon 2WD L5-3.5L VIN 6 (2004)
Tighten
Tighten the seat cushion frame mounting nuts to 24 N.m (18 lb ft).
3. Install the assist spring.
4. Install the seat cushion foam pad and cover to the frame.
5. Install the seat belt buckle assembly (1) through the seat cushion pad.
6. Install the seat belt buckle assembly (1) to the seat adjuster with the bolt (2).
Tighten
Tighten the seat belt buckle bolt to 55 N.m (41 lb ft).
7. Connect the seat belt buckle electrical connector (1).
8. Connect the wiring harness (2) to the seat position switch.
9. Position the seat back assembly on the seat cushion assembly.