Canyon 2WD L5-3.5L VIN 6 (2004)
Power Seat Switch: Procedures
Lumbar Switch Replacement
LUMBAR SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the seat cushion outer trim panel.
2. Remove the switch bezel from the seat assembly.
3. Remove the buttons from the switch (3).
4. Release the tabs (4) that retain the seat switch (3) to the seat bezel.
5. Disconnect the lumbar switch harness (1) from the seat harness.
6. Remove the lumbar switch from the seat bezel.
INSTALLATION PROCEDURE
