Canyon 2WD L5-3.5L VIN 6 (2004)
Tighten the seat switch bezel screws to 1.5 N.m (13 lb in).
6. Install the seat cushion outer trim panel to the seat assembly.
7. Install the seat in the vehicle.
Seat Switch Replacement - Power
Seat Switch Replacement - Power
Removal Procedure
1. Remove the seat cushion outer trim panel.
2. Remove the switch bezel from the seat assembly.
3. Remove the buttons from the switch (2).
4. Release the tabs (1) that retain the seat switch (2) to the seat bezel.
5. Disconnect the power seat switch harness (1) from the seat harness.
6. Remove the power seat switch from the seat bezel.
Installation Procedure