Canyon 2WD L5-3.5L VIN 6 (2004)
1. Position the starter motor (3) over the stud (2).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the starter motor mounting nut (1) and bolt (4).
Tighten
Tighten the starter motor mounting fasteners to 50 N.m (37 lb ft).
3. Connect the battery positive cable (2) to the starter and install the starter terminal nut (1)
Tighten
Tighten the battery positive cable to starter terminal nut to 9 N.m (80 lb in).
4. Connect the lead (4) to the starter solenoid and install the starter solenoid S terminal nut (3).
Tighten
Tighten the starter solenoid S terminal nut to 3.5 N.m (31 lb in).
5. Install the intake manifold.