Canyon 2WD L5-3.5L VIN 6 (2004)
9.
Remove the steering gear vertical mounting nuts, the washers and the bolts.
10.
On 4WD vehicles, support the front carrier and remove the drivers side mounting bracket-to-frame bolts.
11.
Move LH side of the front carrier rearward enough to remove the gear.
12.
Remove the steering gear horizontal mounting nuts, the washers and the bolts.
13.
Remove the steering gear RH isolator bracket.
14.
Remove the crossmember, 2WD ONLY.
15.
Remove the steering gear from the vehicle.
Installation Procedure
1.
Install the steering gear into the vehicle.