Canyon 2WD L5-3.5L VIN 6 (2004)
Accumulator: Service and Repair
Accumulator Assembly, Spacer Plate, and Gaskets
^
Tools Required
-
J 2525-B Pump and Valve Body Alignment Pin Set
-
J 36850 Trans-jel Lubricant
Removal Procedure
1. Remove the transmission oil pan and filter.
Important: The 1-2 accumulator can be removed without removing the control valve assembly.
2. Remove the control valve body.
3. Remove the accumulator cover retaining bolts.
4. Remove the 1-2 accumulator cover assembly.
^
RWD (1)
^
4WD (2)
5. Disassemble the 1-2 accumulator.
5.1.
Blow compressed air into the 1-2 accumulator cover, as shown, to remove the 1-2 accumulator piston.
5.2.
Remove the 1-2 accumulator inner and outer springs.
6. Inspect the 1-2 accumulator inner and outer springs for cracks.