Canyon 2WD L5-3.5L VIN 6 (2004)
7. Remove the bolts securing the park/neutral back up switch to the transmission.
Important: If the switch does not slide off the manual shaft, the outer edge of the manual shift shaft may need to be filed to remove any burrs.
8. Remove the park/neutral back up switch from the manual shaft.
Installation Procedure
1. Install the park/neutral back up switch to the transmission manual shaft by aligning the switch hub flats with the manual shaft flats.
2. Slide the switch onto the transmission manual shaft until the switch mounting bracket contacts the mounting bosses on the transmission.
Important: If a new switch is being installed, the switch will come with a positive assurance bracket. The positive assurance bracket aligns the new
switch in the proper position for installation and the use of the J 41364-A will not be necessary.
3. Loosely install the 2 park/neutral back up switch bolts.
