Canyon 2WD L5-3.5L VIN 6 (2004)
Clutch Switch: Service and Repair
Clutch Pedal Position Switch Replacement
Removal Procedure
1. Disconnect the electrical connector (2) from the clutch pedal position switch (1).
2. Push the clutch pedal position switch retaining plate locking tabs (2) inward toward each other to release.
3. Remove the clutch pedal position switch (3) from the clutch pedal assembly (1).
Installation Procedure
1. Slide the clutch pedal position switch (3) with retaining plate (2) into the clutch pedal bracket (1), until the locking tabs (2) are fully engaged.
