Canyon 2WD L5-3.5L VIN 6 (2004)
Pinion Flange: Service and Repair
Drive Pinion Flange/Yoke and/or Oil Seal Replacement
^
Tools Required
-
J 8614-01 Flange and Pulley Holding Tool
-
J 3,3782 Pinion Oil Seal Installer
-
J 38694 Extension Housing Oil Pump/Seal Installer
Removal Procedure
Important: Observe and mark the positions of all the driveline. components, relative to the propeller shaft and the axles, prior to disassembly. These
components include the propeller shafts, drive axles, pinion flanges, output shafts, etc. Reassemble all the components in the exact places in which you
removed the parts. Follow any specifications, torque values, and any measurements made prior to disassembly.
1. Raise the vehicle.
2. Remove the rear brake drums.
3. Remove the propeller shaft.
^
For vehicles equipped with one piece propeller shafts, refer to Propeller Shaft Replacement One Piece.
^
For vehicles equipped with two piece propeller shafts, refer to Propeller Shaft Replacement Two Piece.
