Canyon 2WD L5-3.5L VIN 6 (2004)
Shifter M/T: Service and Repair
W/O D06
Shift Lever Assembly Replacement (W/O D06)
Removal Procedure
1. Pull upward on the front of the boot (3) in order to disengage the boot retainers (2) from the floor console (1).
2. Remove the set screw (1) from the shift lever (2).
3. Remove the shift lever assembly from the control lever.
Installation Procedure
1. Install the shift lever assembly to the control lever, aligning the set screw threaded hole with the seat (13)
2. Apply thread-lock GM P/N 12345493 (Canadian P/N 10953488) to the shift lever set screw threads.