Canyon 2WD L5-3.5L VIN 6 (2004)
Window Frame: Service and Repair
Windshield Frame Pillar Sectioning - Outer
Removal Procedure
IMPORTANT:
-
Section in specified areas only. Sectioning outside of these areas may compromise the structural integrity of the vehicle. The door frame can be
replaced at factory seams, but requires the removal of the windshield and the roof. The sectioning procedures have been developed as a more
cost-effective alternative to complete replacement. The specific area to be sectioned is determined by the extent of the damage to the vehicle.
-
When replacing panels that involve servicing of stationary glass, refer to Urethane Adhesive Installation of Stationary Windows in General
Information before performing any priming or refinishing.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zones.
2. Disconnect the negative battery cable.
3. Remove all related panels and components.
4. Repair as much of the damage as possible to factory specifications.
CAUTION: Foam sound deadeners must be removed from areas within 152.4 mm (6 in) of where flame is to be used for body repairs. When
reinstalling foam sound deadeners, avoid inhaling fumes as bodily injury may result.
5. Note the location and remove the sealers and anti-corrosion materials from the repair area, as necessary.
