Canyon 2WD L5-3.7L (2007)
Antenna Cable: Service and Repair
Digital Radio Antenna Cable Replacement
Digital Radio Antenna Cable Replacement
Removal Procedure
1. If the vehicle is equipped with OnStar(R) refer to Coaxial Cable Replacement - Navigation and Cellular Telephone Antenna (UE1) Coaxial Cable
Replacement - Navigation and Cellular Telephone Antenna (UE1, U2K).
2. Lower the front portion of the headliner to reveal the digital radio antenna connectors. Refer to Headlining Trim Panel Replacement (Crew Cab)
Headlining Trim Panel Replacement (Extended Cab) Headlining Trim Panel Replacement (Regular Cab).
3. Disconnect the digital radio antenna connectors (1).
4. Detach the 2 upper coax cable retainers from the header panel.
5. Detach the 3 coax cable retainers from the windshield pillar.
6. Lower the instrument panel (I/P) compartment door to a full down position.
7. Disconnect the digital receiver extension cable (1) from the receiver.
8. Remove the retainers (2) from the I/P.
9. Disconnect the electrical connector (3).
10. Remove the extension cable from the vehicle.
