Canyon 2WD L5-3.7L (2007)
Front Door Window Motor: Service and Repair
FRONT SIDE DOOR WINDOW REGULATOR MOTOR REPLACEMENT
REMOVAL PROCEDURE
1. CAUTION: Do not attempt to service the regulator motor without releasing the counterbalance spring tension. The regulator lift arm is
under tension from the counterbalance spring and can cause personal injury if the motor is removed from the regulator.
Remove the front door window regulator.
2. Drill a hole (1) through the window regulator bracket and lift arm.
3. Install a nut and bolt through the hole (1) to secure the lift arm while the motor is removed.
4. Remove the bolts retaining the front window regulator motor to the regulator bracket.
5. Remove the front window regulator motor from the regulator.
INSTALLATION PROCEDURE