Canyon 2WD L5-3.7L (2007)
1. Install the lower latch to the rear side access door.
2. NOTE: Refer to Fastener Notice.
Install the bolts retaining the lower latch to the rear side access door.
Tighten the rear side access door lower latch bolts to 9 N.m (80 lb in).
3. Install the nut retaining the lower latch to the rear side access door.
Tighten the rear side access door lower latch nut to 9 N.m (80 lb in).
4. Connect the lower latch rod (1) to the latch using the retaining clip (2).
5. Install the rear side access door trim panel.
6. Close the rear side access door.