Canyon 2WD L5-3.7L (2007)
Rear Door Striker: Service and Repair
Striker Replacement Rear Side Access Door - Lower
STRIKER REPLACEMENT REAR SIDE ACCESS DOOR - LOWER
REMOVAL PROCEDURE
1. Open the rear side access door.
2. Remove the bolts retaining the lower side access door striker to the body.
3. Remove the lower side access door striker from the body.
INSTALLATION PROCEDURE
1. Install the lower side access door striker to the body.
2. NOTE: Refer to Fastener Notice.
Install the bolts retaining the lower side access door striker to the body.
Tighten the lower side access door striker bolts to 25 N.m (18.4 lb ft).
3. Close the rear side access door.