Canyon 2WD L5-3.7L (2007)
1. Install the wedge to the side access door by inserting the tabs into the slots on the door and rotating the wedge up until the retaining clip is fully
seated.
2. Close the rear side access door.
Weatherstrip Replacement Rear Side Access Door
Weatherstrip Replacement Rear Side Access Door
Tools Required
J 38778 Door Trim Pad Clip Remover or Equivalent
Removal Procedure
1. Open the front and rear side access doors.
2. Remove the upper molded detail from the front of the side access door, by inserting J 38778 under the weatherstrip mold and releasing the integral