Canyon 2WD L5-3.7L (2007)
Glove Compartment: Service and Repair
Instrument Panel Storage Compartment Replacement
Instrument Panel Storage Compartment Replacement
Removal Procedure
1. Remove the screws retaining the instrument panel (I/P) compartment assembly to the I/P.
2. Open the I/P compartment door.
3. Remove the I/P compartment assembly from the vehicle.
Installation Procedure
1. Position the I/P compartment assembly to the I/P.
2. Close and fully latch the I/P compartment door.
Notice: Refer to Fastener Notice.
3. Install the fasteners retaining the I/P compartment assembly to the I/P.
Tighten the fasteners to 3 N.m (27 lb in).
4. Ensure the alignment of the door allows for proper operation.