Canyon 2WD L5-3.7L (2007)
1. Remove the right front door sill trim plate.
2. Grasp the right hinge pillar trim panel and gently pull the panel away from the body to release the fasteners.
3. Remove any fasteners that may have pulled away from the panel and reinstall them to the back of the panel.
4. Slide the panel forward so the panel unhooks from around the front door frame.
5. Remove the right hinge pillar trim panel from the vehicle.
Installation Procedure
1. Position the right hinge pillar trim panel over the pillar and door sill.
2. Ensure that the panel fasteners are aligned with the holes in the body.
3. Install the panel by pushing firmly against the body to seat the panel fasteners.
4. Install the right front door sill trim plate.
Body Rear Trim Panel Replacement (Crew Cab)
Body Rear Trim Panel Replacement (Crew Cab)
Removal Procedure
1. Remove the rear seat.
2. Remove the jack and tool storage bracket.