Canyon 2WD L5-3.7L (2007)
1. Grasp the lower center pillar trim panel and gently pull the panel away from the body to release the fasteners.
2. Remove any fasteners that may have pulled away from the panel and reinstall them to the back of the panel.
3. Slide the panel forward so the panel unhooks from around the front door frame.
4. Remove the lower center pillar trim panel from the vehicle.
Installation Procedure
1. Position the lower center pillar trim panel so that the front edge hooks around the front door frame.
2. Ensure that the panel fasteners are aligned with the holes in the body.
3. Install the panel by pushing firmly against the body to seat the panel fasteners.
Center Pillar Upper Trim Panel Replacement
Center Pillar Upper Trim Panel Replacement
Removal Procedure
1. Remove the lower center pillar trim panel.
2. Remove the upper anchor bolt for the front seat belt.
3. Remove the seat belt adjuster knob.