Canyon 2WD L5-3.7L (2007)
Door Lock Cylinder: Service and Repair
FRONT SIDE DOOR LOCK CYLINDER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the front door trim panel.
2. Remove the front door water deflector.
3. Remove the front outside door handle.
4. Remove the bolts retaining the lock cylinder to the front outside door handle.
5. Remove the lock cylinder from the door.
INSTALLATION PROCEDURE
1. Install the lock cylinder to the front outside door handle.
2. NOTE: Refer to Fastener Notice.
Install the bolts retaining the lock cylinder to the outside door handle.
Tighten the lock cylinder bolts to 9 N.m (80 lb in).
3. Install the front outside door handle.
4. Install the front door water deflector.
5. Install the front door trim panel.