Canyon 2WD L5-3.7L (2007)
Notice: Refer to Fastener Notice.
2. Tighten the seat cushion frame mounting nuts (1) that secure the seat cushion frame to the power seat adjuster frame.
Tighten the front seat cushion frame mounting nuts to 24 N.m (18 lb ft).
3. Install the seat cushion cover and pad over the seat cushion frame.
4. Install the cable end to the seat adjuster (2) by inserting the ball (1) though the round opening.
5. Install the seat adjuster cable (3) to the seat adjuster (2).
6. Repeat steps 5 and 6 to install the cable to the opposite side of the seat.
7. Install the seat switch bezel.
8. Install the seat cushion outer trim panel.
9. Install the seat in the vehicle.
Seat Back Recliner Replacement - Front
Seat Back Recliner Replacement - Front
Removal Procedure
1. Remove the seat from the vehicle.
2. Remove the seat cushion outer trim panel.
3. Remove the seat cushion cover and pad.
4. Remove the seat back cover and pad.
