Canyon 2WD L5-3.7L (2007)
1. Remove the seat back recliner handle.
2. Remove the 3 screws retaining the trim panel to the seat.
3. Remove the front seat cushion outer trim panel from the vehicle.
Installation Procedure
1. Align the front seat cushion outer trim panel to the seat assembly.
Notice: Refer to Fastener Notice.
2. Install the 3 seat cushion outer trim panel mounting screws.
Tighten the front seat cushion outer trim panel screws to 1.5 N.m (13 lb in).
3. Install the seat back recliner handle.
Seat Cushion Cover and Pad Replacement - Front
Seat Cushion Cover and Pad Replacement - Front
Removal Procedure
