Canyon 2WD L5-3.7L (2007)
Wheel Cylinder: Service and Repair
Wheel Cylinder Replacement
Removal Procedure
Caution: Refer to Brake Dust Caution.
Caution: Refer to Brake Fluid Irritant Caution.
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the rear brake shoe assembly.
3. Remove the brake line from the wheel cylinder.
4. Using a plug, plug the brake line as not to allow dirt or the brake fluid to be contaminated.
5. Remove the mounting bolts for the wheel cylinder.
6. Remove the wheel cylinder from the backing plate.
Installation Procedure