Canyon 2WD L5-3.7L (2007)
Heater Hose: Service and Repair
Heater Pipe Replacement - Inlet
Heater Pipe Replacement - Inlet
Tools Required
J38185 Hose Clamp Pliers
Removal Procedure
1. Drain the engine cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill).
2. Using the J38185, reposition the heater hose outlet clamp from the heater pipe inlet.
3. Remove the heater hose outlet from the heater pipe inlet.
4. Remove the exhaust heat shield.
5. Remove the heater inlet pipe bolt.
6. Remove the heater inlet pipe.
Installation Procedure