Canyon 2WD L5-3.7L (2007)
Camshaft: Service and Repair
Camshaft Replacement
Tools Required
*
J 44221 Camshaft Holding Tool
*
J 44222 Camshaft Sprocket Holding Tool
*
J 45059 Angle Meter
Removal Procedure
1. Remove the camshaft cover.
2. Remove the exhaust camshaft position (CMP) sensor.
3. Remove the Intake CMP sensor.
4. Rotate the crankshaft in the engine rotational direction clockwise, until the #1 piston is at top dead center (TDC) on the compression stroke.
The word Delphi on the exhaust camshaft position actuator will be parallel with the cylinder head to cam cover mating surface.