Canyon 2WD L5-3.7L (2007)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
Tools Required
*
EN 46547 Flywheel Holding Tool
*
J 41478 Crankshaft Balancer Installer
*
J 41816-2 Crankshaft End Protector
*
J 45059 Angle Meter
Removal Procedure
1. Remove the drive belt.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the service slot plug.
Important: The crankshaft balancer does not have a key-way; so the crankshaft could turn when tightening, causing an improper torque.
4. Install the EN 46547 (1) into the flywheel teeth.
5. Lower the vehicle.