Canyon 2WD L5-3.7L (2007)
Drive Belt Tensioner: Testing and Inspection
Drive Belt Tensioner Diagnosis
Inspection Procedure
Notice: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.
1. Remove the drive belt.
2. Position a hex-head socket on the belt tensioner pulley bolt head.
3. Move the drive belt tensioner through it's full travel.
*
The movement should feel smooth.
*
There should be no binding.
*
The tensioner should return freely.
4. If any binding is observed, replace the tensioner.
5. Install the drive belt.