Canyon 2WD L5-3.7L (2007)
Idler Pulley: Service and Repair
Drive Belt Idler Pulley Replacement
Removal Procedure
1. Remove the drive belt.
2. Remove the left front wheelhouse liner.
3. Remove the air conditioning (A/C) suction hose from the compressor.
4. Remove the A/C discharge hose from the compressor.
5. Remove the bolts securing the drive belt idler pulley to the engine.
6. Remove drive belt idler pulley from the engine.
Installation Procedure
1. Position drive belt idler pulley to the engine.