Canyon 2WD L5-3.7L (2007)
2. Position the water pump to the engine.
Notice: Refer to Fastener Notice.
3. Install the water pump bolts.
Tighten the bolts to 10 N.m (89 lb in).
4. Install the water pump pulley.
5. Install the water pump pulley bolts.
6. Using the J 46406, secure the water pump pulley while tightening the water pump pulley bolts.
Tighten the bolts to 25 N.m (18 lb ft).
7. Remove the J 41240.
8. Install the drive belt.
9. Install the fan.
10. Fill the cooling system with the specified coolant and concentration.
11. Inspect for leaks.