Canyon 2WD L5-3.7L (2007)
1. Install the mode cable (3).
Make certain that the cable is properly seated in the notches in the HVAC control assembly (6).
2. Install the mode cable (3) to the HVAC control assembly (6).
3. Install the mode cable to the retaining clip.
Notice: Refer to Fastener Notice.
4. Install the mounting screws to the HVAC control assembly.
Tighten the screws to 1.9 N.m (17 lb in)
5. Install the radio.
6. Install the mode cable (4) to the mode control cam (2).
7. Install the mode cable (4) to the retaining clip (3).
8. Install the radio.
9. Install the HVAC control assembly.
