Canyon 2WD L5-3.7L (2007)
Compressor Clutch Hub: Service and Repair
Compressor Clutch Plate/Hub Assembly Replacement
Removal Procedure
1. Remove the compressor.
2. Remove the clutch plate retaining bolt (1).
3. Remove the clutch plate assembly (2).
4. Remove the clutch hub/bearing snap ring (3).
5. Remove the clutch hub/bearing assembly (4).
Installation Procedure
1. Install the clutch hub/bearing assembly (4).
2. Install the clutch hub/bearing snap ring (3).
3. Install the clutch plate assembly (2).
Notice: Refer to Fastener Notice.
4. Install the clutch plate retaining bolt (1).
Tighten the bolt to 18 N.m (13 lb ft).
5. Install the compressor.