Canyon 2WD L5-3.7L (2007)
Canister Purge Solenoid: Service and Repair
Evaporative Emission Canister Purge Solenoid Valve Replacement
Removal Procedure
1. Raise and support the vehicle only high enough to access the evaporative emission (EVAP) canister purge solenoid valve through the wheelhouse.
Refer to Vehicle Lifting.
2. Remove the left wheelhouse liner.
3. Refer to Plastic Collar Quick Connect Fitting Service in order to disconnect the following from the EVAP canister purge solenoid valve (3):
* The EVAP purge hose/pipe
* The EVAP purge hose (1)
4. Disconnect the electrical connector from the EVAP canister purge solenoid valve.