Canyon 2WD L5-3.7L (2007)
Fuel Tank Unit: Service and Repair
Fuel Tank Module Replacement
Tools Required
J 45722 Fuel Sender Lock Ring Tool
Removal Procedure
Notice: Clean all of the following areas before performing any disconnections in order to avoid possible contamination in the system:
* The fuel pipe connections
* The hose connections
* The areas surrounding the connections
Remove the fuel tank.
1. Disconnect the evaporative emission (EVAP) line (1) quick connect fittings from the module and the vent valve.
2. Remove the EVAP line from the clip on the side of the fuel tank.
3. Disengage the EVAP line from the retaining features molded into the fuel tank and remove the EVAP line.
4. Disconnect the fuel feed line (2) quick connect fitting from the module.
5. Disengage the fuel feed line from the retaining feature molded into the fuel tank and remove the fuel line.