Canyon 2WD L5-3.7L (2007)
Central Control Module: Service and Repair
Communication Interface Module Replacement
Removal Procedure
Important: The vehicle communication interface module (VCIM) has a specific set of unique numbers that tie the module to each vehicle.
These numbers, the 10-digit station identification (STID) and the 11-digit electronic serial number (ESN), are used by the National
Cellular Network and OnStar(R) to identify the specific vehicle. Because these numbers are tied to the vehicle identification number of
the vehicle, you must never exchange these parts with those of another vehicle.
1. Position the right rear seat bottom to a cargo position.
2. Ensure the ignition switch is in the OFF position.
3. Remove the service panel located on the right side of the instrument panel (I/P).
4. Disconnect the VCIM electrical connectors as necessary.