Canyon 2WD L5-3.7L (2007)
Seat Belt Tensioner: Removal and Replacement
Seat Belt Retractor Pretensioner Replacement - Front (Regular Cab)
Seat Belt Retractor Pretensioner Replacement - Front (Regular Cab)
Removal Procedure
1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Open the front seat belt upper guide shoulder bolt trim cover.
3. Remove the front seat belt upper guide shoulder bolt.
4. Remove the body rear corner trim panel.
5. Remove the front seat belt anchor bolt.
6. Disconnect the electrical connector from the retractor/pretensioner.
7. Remove the bolt that retains the seat belt retractor/pretensioner assembly to the body.
8. Remove the front seat belt assembly from the vehicle.
Installation Procedure
1. Position the rear seat belt retractor/pretensioner assembly to the vehicle.