Canyon 2WD L5-3.7L (2007)
2. Open the belt upper guide shoulder bolt trim cover.
3. Remove the front seat belt upper guide shoulder bolt.
4. Remove the body rear corner trim panel.
5. Remove the seat belt anchor bolt.
6. Disconnect the electrical connector from the retractor/pretensioner.
7. Remove the bolt that retains the seat belt retractor/pretensioner assembly to the body.
8. Remove the seat belt assembly from the vehicle.
Installation Procedure
1. Position the seat belt retractor/pretensioner assembly to the vehicle.
Notice: Refer to Fastener Notice.
2. Install the bolt which retains the seat belt retractor/pretensioner assembly to the body.