Canyon 2WD L5-3.7L (2007)
Evaporator Temperature Sensor / Switch: Service and Repair
Evaporator Temperature Sensor Replacement
Removal Procedure
1. Remove the radio.
2. Remove the mounting screw from the evaporator temperature control module.
3. Disconnect the electrical connector from the control module.
4. Cut the evaporator temperature sensor wire near the control module.
Important: If you are replacing only the control module, proceed to Step 4 of the Installation Procedure.
5. Remove the evaporator core.
6. Using needle nose pliers, carefully remove the evaporator temperature sensor from the evaporator core.
Installation Procedure