Canyon 2WD L5-3.7L (2007)
*
The 3-2 shift solenoid (6)
5. RWD ONLY:
1. Remove the fluid indicator stop bracket bolt (2).
2. Remove the fluid indicator bracket (1).
6. Remove the TCC/PWM solenoid retainer (2) with a small screwdriver. Rotate the solenoid (1) in the bore, if necessary, until the flat part of the
retainer (2) is visible.
7. Remove the TCC/PWM solenoid (1) in order to access the TCC solenoid retaining bolts.
8. Remove the TCC solenoid retaining bolts.
9. Remove the TCC solenoid with O-ring seal, and wiring harness from the control valve body.