Canyon 2WD L5-3.7L (2007)
3. Install the steering knuckle.
Notice: Refer to Fastener Notice.
4. Connect the lower ball joint to the steering knuckle and install the retaining nut.
Tighten the nut to 145 N.m (107 lb ft).
5. Connect the upper ball joint to the steering knuckle and install the retaining nut.
Tighten the nut to 75 N.m (55 lb ft).
6. Connect the outer tie rod to the steering knuckle.
7. Install the wheel hub and bearing assembly.
8. Install the tire and wheel.
9. Remove the lower control arm support.
10. Lower the vehicle.
11. Verify the wheel alignment. Refer to Wheel Alignment Specifications.